Skip to content

Air con remote symbols explained (Mitsubishi Electric, Daikin and others)

The snowflake is cool, the sun is heat, the water drop is dry, the fan is fan only and the A is auto. That's the same on most remotes. Below, each symbol in plain English, then the extra buttons on Mitsubishi Electric and Daikin remotes, taken from their own manuals, and which mode to use in summer and winter.

Hand pointing a white air conditioning remote at a wall-mounted unit with its louvre open in a calm sage green bedroom
cool, heat, dry, fan and auto
5 modes
Mitsubishi remote signal range
About 6 m
filter clean, both makers advise
Every 2 weeks
On this page10 sections

Air con remote symbols: the five modes

Press the MODE button (Mitsubishi calls it Operation select) to step through these.

SymbolModeWhat it does
SnowflakeCoolCools the room to the temperature you set
SunHeatHeats the room to the temperature you set
Water dropDryLowers the humidity. You can't set the temperature, the unit picks it
FanFan onlyMoves air without heating or cooling. On Mitsubishi the outdoor unit stays off
A in a box (Daikin), AUTO (Mitsubishi)AutoSwitches between cooling and heating by itself to hold your set temperature

Mitsubishi air con remote symbols and buttons

From Mitsubishi Electric UK's manuals for the MSZ-LN (OBH766H), MSZ-AP (JG79Y415) and MSZ-HR (DG79A0F9). The MSZ-HR remote has no AUTO mode.

Mitsubishi Electric buttons

ButtonWhat it doesWhich remotes
ECONO COOLCool mode only: sets the temperature 2°C higher and swings the vane so it still feels cool, saving energyLN, AP, HR
POWERFULAdjusts the fan speed and temperature for a quick boost, then returns to normal after 15 minutesLN
SENSOR (i-see)Scans the room and controls by how warm it feels to people. More presses set absence detection: save energy or switch off when nobody is inLN
i-saveRecalls a saved favourite setting with one pressLN, AP
NIGHT MODEDims the indoor lamp, stops the beep and limits outdoor unit noiseLN, AP, HR
VANE (up-down)AUTO, positions 1 to 5, or SWINGLN, AP, HR

Daikin air con remote symbols and buttons

From Daikin's user reference guides for the Perfera (FTXM-R, 4P518786-5F) and Stylish (FTXA-C, 4P518786-10V). Both remotes have the same buttons.

Daikin buttons

ButtonWhat it does
PowerfulFull capacity and top fan speed for 20 minutes, then back to your normal setting
EconoCaps the power the unit draws, handy if the breaker might trip with other appliances on
Outdoor unit quietQuieter outdoor unit, for example at night. Same button as Econo
Comfort airflowPoints air upward when cooling and downward when heating, so it doesn't blow on you
Intelligent eyeDetects movement. After 20 minutes with nobody seen, it lowers heating by 2°C or raises cooling by 2°C
Fan buttonFive speeds, auto, or indoor unit quiet. Not adjustable in dry mode

Which mode to use in summer and winter

Cool or dry in summer, heat in winter. Here's when each one fits.

  • Summer: cool on hot days. On muggy days, dry mode takes moisture out without you setting a temperature. More in air con with a dehumidifier
  • Winter: heat. Your air conditioner is an air-to-air heat pump, moving heat in from outside
  • In cold weather it pauses to defrost the outdoor unit, with no warm air for a while. That's normal
  • Daikin recommends 26 to 28°C for cooling and 20 to 24°C for heating to save energy, with air aimed up when cooling and down when heating

Remote not working or the unit weak?

  • Change both batteries at once (AAA). Daikin says they last about a year
  • On a Mitsubishi remote, press RESET after fitting new batteries
  • Point it at the unit from within about 6 m, out of direct sunlight. Some fluorescent lamps block the signal
  • Check the timer and the breaker
  • Weak cooling or heating? Clean the filters: both makers advise every 2 weeks
  • Lamp blinking? Read Mitsubishi Electric error codes or Daikin error codes

When to call us

Clean filters, new batteries and still weak? Book a visit. We repair Mitsubishi Electric, Daikin and other brands whoever fitted them, and a yearly air conditioning service keeps it running well.

Air con remote symbol questions

What does the water drop symbol mean on an air con remote?

It's dry mode, which lowers the humidity. On Mitsubishi Electric and Daikin units you can't set the temperature in dry mode: the unit decides it.

What is ECONO COOL on a Mitsubishi remote?

In cool mode, ECONO COOL raises the set temperature by 2°C and swings the vane so the air still feels cool, saving energy. The remote screen doesn't change.

What does i-see mean on a Mitsubishi air conditioner?

i-see is a sensor on models such as the MSZ-LN that scans the room and detects people by their body heat. It can save energy or switch off when nobody is there.

What does the A symbol mean on a Daikin remote?

An A in a box is automatic mode. The unit cools or heats to your set temperature and switches between the two by itself when needed.

Should I use dry mode or cool mode in summer?

Cool mode when it's hot. Dry mode when it's humid and sticky but not very hot.

How long does Powerful mode last?

On a Daikin Perfera or Stylish it runs for 20 minutes. On a Mitsubishi Electric MSZ-LN it stops after 15 minutes. Both then go back to your previous setting.

Why is my air con remote not working?

Fit new batteries, both at once, and on a Mitsubishi Electric remote press RESET. If the unit still won't respond, check the breaker, then call us.

Sources

5
  1. Mitsubishi Electric UK, MSZ-LN18 to 60VG2 service manual OBH766H
  2. Mitsubishi Electric UK, MSZ-AP25 to 50VG(K) operating instructions JG79Y415L01
  3. Mitsubishi Electric UK, MSZ-HR25 to 50VF2 instruction book DG79A0F9L01
  4. Daikin UK, Perfera CTXM-R and FTXM-R user reference guide 4P518786-5F
  5. Daikin UK, Stylish CTXA-C and FTXA-C user reference guide 4P518786-10V