Samsung error codes: what they mean and what to do
Samsung wall units show their codes on the indoor unit's display. Some, like CF and dF, are reminders or normal operation. Codes such as E101 or E554 mean the unit has found a fault. Here is how to read them, what each common code means according to Samsung's own support pages and manuals, what you can safely try and when to book a repair.

- filter cleaning reminder, not a fault
- CF
- defrost, normal in heating
- dF
- repair price before any work
- Written
- we repair Samsung whoever fitted it
- Any fitter
On this page13 sections
How Samsung shows a code
Samsung wall units have a small display on the front of the indoor unit. When the unit finds a fault, it stops and the display shows a code, usually a letter and three numbers such as E101.
- In normal use the display shows the temperature and a few symbols
- A fault code may blink
- On some models and model years the code starts with C rather than E, so you may see C101 instead of E101
- Samsung says the first letter varies by model year. Read the numbers, and tell us exactly what the display showed
- Samsung's manual for its current wall units says: write the code down, then contact your service provider with it
- If the indicator keeps blinking, switch the unit off with the Power button or at the power supply first
How to read and record the code
Read the display
Look at the indoor unit's display and write down the code exactly, including the first letter. A photo or a short video is even better, as some codes blink.
Rule out reminders
Check whether it's CF, Cl or dF. These are reminders or normal operation, explained below, not faults.
Note the model
Photograph the label on the side of the indoor unit. The model number, such as AR60F09C1AWNEU, tells us which list of codes applies.
Check past codes
On Samsung's two-way swing AR9500T wall units sold since 2020, you can see recent codes: with the unit and remote off, hold Mode, Set and < together for 5 seconds, pointing at the unit.
Read the history
The display shows up to three past codes, newest first, marked A, b and c. Samsung says 00 means no past errors. The codes disappear when the unit is switched off.
Display codes that aren't faults
Samsung lists these as information codes. They don't need an engineer, and the unit carries on working.
| Code | What Samsung says it means | What to do |
|---|---|---|
| CF | Filter cleaning reminder. Samsung's support page says it appears every 14 days | Switch off, clean the filter as shown in your manual, then reset the filter reminder. |
| Cl | Auto Clean is running. Samsung provides it to deal with odours from the indoor unit | Nothing. It switches off by itself when done. You can turn Auto Clean off from the remote. |
| dF | Defrost in heating mode: the unit is clearing frost from the outdoor unit | Wait. Samsung says it runs for 5 to 12 minutes. Steam from the outdoor unit is normal. |
Communication codes
These mean the indoor and outdoor units, or the boards inside the outdoor unit, can't talk to each other.
| Code | What Samsung says it means | What to do |
|---|---|---|
| E101 | No communication between the indoor and outdoor units for 1 minute | One reset at the isolator. If it returns, book a repair: wiring or a circuit board needs checking. |
| E102 | No communication between the indoor and outdoor units for 1 minute | One reset at the isolator. If it returns, book a repair. |
| E202 | No communication between the indoor and outdoor units for 1 minute | Check the outdoor unit has power, then one reset. Book a repair if it returns. |
| E203 | Communication error between the outdoor unit's main board and its inverter board | Book a repair. |
| E556 | The system can't compare the capacity of the indoor and outdoor units | Book a repair. It points to the combination of units, not something you can fix. |
Indoor unit codes
These come from the indoor unit's sensors, fan and memory.
| Code | What Samsung says it means | What to do |
|---|---|---|
| E121 | Indoor room temperature sensor error | Book a repair. The sensor or its connection needs testing. |
| E122 | Indoor pipe (coil) temperature sensor error | Book a repair. The sensor or its connection needs testing. |
| E154 | Indoor fan speed error: the motor didn't reach 450 rpm within 15 seconds | Check nothing is blocking the air outlet. Book a repair; don't reach inside the unit. |
| E162 | EEPROM error: the memory chip on the indoor unit's control board | One reset at the isolator. Book a repair if it returns. |
Outdoor unit codes
Most of these are outdoor sensors, electronics or the compressor protecting itself. They need an engineer, but a blocked outdoor unit is worth ruling out first.
| Code | What Samsung says it means | What to do |
|---|---|---|
| E221 | Outdoor air temperature sensor error | Book a repair. |
| E237 | Outdoor air temperature sensor error | Book a repair. |
| E251 | Discharge temperature sensor error | Book a repair. |
| E416 | Compressor discharge overheating | Clear space around the outdoor unit, then book a repair. Don't keep restarting it. |
| E458 | Outdoor fan error | From a distance, check nothing is blocking the outdoor fan. If clear, book a repair. |
| E461 | Compressor start error | Book a repair. Leave the unit off. |
| E462 | Current trip or power factor correction (PFC) overcurrent error | Book a repair. Leave the unit off. |
| E464 | IPM overcurrent error: the power module that drives the compressor | Book a repair. Leave the unit off. |
| E465 | Compressor voltage limit error | Book a repair. |
| E467 | Compressor rotation error | Book a repair. Leave the unit off. |
| E468 | Current sensor error | Book a repair. |
| E469 | DC voltage sensor error | Book a repair. |
| E472 | AC voltage signal error | Book a repair. Tell us if you've had power cuts or other electrical problems. |
| E554 | Gas leak error: Samsung's code for refrigerant leaking from the system | Switch off and book an F-Gas certified engineer. Don't keep restarting it. |
Source: Samsung's error code support page and its AR60F and AR70F user manual, checked October 2026. Some models show C instead of E as the first letter.
The refrigerant code: E554
Samsung lists E554 as a gas leak error. A split system is sealed, so if the refrigerant is low, it has leaked out somewhere. Running the system short of refrigerant makes the compressor work hot, so switch it off rather than keep restarting it.
Finding and fixing a leak and recharging the system is work for an F-Gas certified engineer only, by law. Ours are F-Gas and REFCOM certified, and we fix the leak before recharging rather than just topping it up.
The filter reminder: CF
CF is the code people see most and it isn't a fault. It's a reminder to clean the filter, which Samsung's manual says to do every two weeks or when the reminder appears.
- Slide the filter out and brush or vacuum it
- Soak it in mild soapy water, rinse and let it dry out of direct sun
- Clear the reminder with Filter reset in the remote's Settings
- Samsung's manual says a blocked filter can reduce cooling and heating
- Not cooling or heating well with a clean filter and no code? Our not cooling guide covers the next checks
Safe checks before you book
These are safe for anyone. If none help, or the same code comes back, stop there and book a visit.
- Write down or photograph the code, and the model number from the label on the indoor unit
- Check the remote is charged or has fresh batteries, and check the mode and any timers
- Switch off, then clean the air filter, as shown in your manual
- Clear leaves, bins or covers from around the outdoor unit, keeping hands away from the fan
- Check the drain pipe outside isn't blocked or squashed if the unit is dripping
- Do one power reset: switch off at the isolator or breaker, wait a few minutes, then switch back on
- Never open the indoor or outdoor unit, or touch wiring or refrigerant pipes
- If a breaker trips, water leaks or you smell burning, leave the unit off and book a repair
Booking a Samsung repair
We repair Samsung systems whoever installed them. Send us the code, the model number and a photo of the label when you book a repair, and we'll tell you what it usually points to before we visit.
We confirm the cost of the visit when you book. On the visit the engineer confirms the fault behind the code and gives you a written price for the repair before any work starts. Visits are booked ahead at a time that suits you.
Samsung error code questions
What does CF mean on a Samsung air conditioner?
CF is a filter cleaning reminder, not a fault. Samsung's support page says it appears every 14 days. Switch the unit off, clean the filter as shown in your manual, then reset the filter reminder from the remote. The unit carries on working while CF shows.
What does dF mean on a Samsung air conditioner?
dF means the unit is defrosting in heating mode. In cold, damp weather frost builds up on the outdoor unit, and Samsung's manual says the defrost runs for 5 to 12 minutes. The indoor fan pauses and you may see steam from the outdoor unit. It's normal and heating resumes afterwards.
What does E101 mean on a Samsung?
Samsung lists E101 as no communication between the indoor and outdoor units for 1 minute. Check the outdoor unit has power, then try one power reset at the isolator. If E101 comes back, book a repair: the connecting cable or a circuit board needs checking.
What does E121 mean on a Samsung?
E121 is an indoor room temperature sensor error. The unit can't read the room temperature properly, so it can't control heating or cooling. It needs an engineer to test the sensor and its connection.
What does E154 mean on a Samsung?
E154 is an indoor fan speed error. Samsung says it shows when the fan motor doesn't reach 450 rpm within 15 seconds of starting. Check nothing is blocking the air outlet, but don't reach inside the unit. Book a repair if it returns.
What does E554 mean on a Samsung?
Samsung lists E554 as a gas leak error, meaning refrigerant is escaping from the system. Switch it off and book an F-Gas certified engineer to find and fix the leak before recharging. Don't keep restarting the unit in the meantime.
Is C101 the same as E101?
Samsung says the first letter of a code can be E or C depending on the model year, so the numbers are what matter. Send us exactly what the display shows, with the model number from the label, and we'll check the meaning for that model.